Oil firm introduces technology to de-sulphur petroleum products
Secured Oil and Gas Limited said it has introduced a nano additive technology for cold de-sulphurization of petroleum products, in compliance with requirements by the Department for Petroleum Resources (DPR). The technology is useful for upgrading the quality of gasoline, converting naptha to gasoline and cracking crude and heavy fuel oil in an easy, low cost and effective way without heating or hazardous pollution.
Speaking on the development, Adamu Abu, Chief Operations Officers (COO) of Secured Oil and Gas Limited, said the company was introducing “nano additive technology used for cold de-sulphurization of petroleum products such as AGO and fuel oil in compliance with DPR requirement.”
He said the technology which cannot be reverse-engineered or copied can be “used to boost research octane number of gasoline (PMS) by between 12 to 15 points thereby upgrading low quality gasoline to high grade gasoline.
“It might be interesting to note that the nano additive converts naphtha into gasoline through a simple cold blending process with net gain in volume.”
According to Abu, “the additive can also completely crack heavy crude or fuel oil without the need for heat, pressure, vacuum, expensive catalyst and machinery. The process can eliminate Fluid Catalytic Cracking (FCC) in a petroleum refinery.”
He noted that “the use of nano additive is to rethink the refining process – something that has not changed for more than 50-60 years.”
The COO expalined that when used to crack crude and heavy fuel oil, the process becomes an easy, low cost and effective way to upgrade heavy hydrocarbons. The additive also can be useful for converting heavy residual fuel oil to marine gas oil, heavy crude oil into lighter crude oil, without waste or toxic, radioactive, environmentally hazardous by-products.
“The unique characteristic is that the density of the nano additive is the same as gasoline/naphtha (0.780-0.788) range. It is alcohol-based in which the nano particles are suspended. As such, it blends with gasoline; it is a simple stir and mix operation at a dosing of 4 per cent,” Abu noted.
He said the additive can be deployed at any site, including source of crude production.